Neon, excimer laser grade
A rare gas that fills the lasers in chipmaking machines. Separated from air, mostly as a by-product of making steel.
judged, with a citation claimed, no citationNumber: papers, preprints and grants the feeds collected — unreviewed
Searched for “neon recycling”, “neon recovery”, “excimer laser gas”, “ArF excimer” in titles and abstracts.
19 collected items, newest first ↓Judged by hand ↓Who is active ↓
All stagesFundamental researchApplied / labPilot / demonstrationEarly commercialAt scaleNewestMost cited
Judged by hand
- On-site neon recycling and separation
Scored 8 here until the source was read. Two years after the shortage, a leading memory maker was still calling its own system an industry first, recovering 72.7% with 77% as a target — which is a working pilot at one firm, not an industry that has adopted it.
Collected by the feeds
- Diffusion and Electrical Characteristics of Phosphorous-Doped Silicon Using Excimer Laser Pulses
In this work, p-type silicon samples were doped with phosphorus using pulses of an ArF excimer laser. In order to separate the effects of the gas and the adsorbed layers on doping characteristics, experiments were performed using two different procedures; doping in POCl3 ambient…
Fundamental research · No laboratory or pilot wording.From OpenAlex · not yet reviewedDOIPDF
- Effects of flow velocity on repetitive pulsed discharge uniformity in ArF excimer laser gas mixtures
Achieving a uniform high-energy discharge at high repetition rates is a fundamental challenge in the scaling of high-pressure gas lasers. Herein, we demonstrate the effect of gas flow velocity on the discharge mode transition and uniformity improvement in repetitively pulsed…
Tsinghua UniversityState Key Laboratory of Power System Operation and Control
Applied / lab · Says "we demonstrate".From OpenAlex · not yet reviewedDOI
- Photochemical formation of superhydrophobic silicone nanofilms on collagen sponges by photodissociation of silicone rubber using ArF excimer laser
National Defense Academy of Japan
Fundamental research · No laboratory or pilot wording.From OpenAlex · not yet reviewedDOI
- Stress-tailored figure correction of thin borosilicate glass by patterned excimer laser irradiation
Spatially homogeneous irradiation of borosilicate glass with an ArF excimer laser at fluences near or above the ablation threshold induces equibiaxial stress at the irradiated surface, causing the substrate to bend in a manner similar to that caused by a coated film. In contrast…
Applied / lab · Says "we demonstrate".From OpenAlex · not yet reviewedDOI
- A study on the pulsed-breakdown characteristics of preionization pin array and circuit-based control in excimer lasers
Abstract This work investigates the pulse-breakdown characteristics of a pre-ionization pin array in an atmospheric-pressure ArF excimer discharge. Time-resolved imaging reveals asynchronous pin breakdown, with failure locations spatially correlated to regions of reduced…
Tsinghua UniversityBeijing University of Chemical TechnologyState Key Laboratory of Power System Operation and Control
Fundamental research · No laboratory or pilot wording.From OpenAlex · not yet reviewedDOI
- Bimetallic AuAg nanostructured photonic Chip via excimer laser irradiation and external electric field for LSPR optical sensing and enhanced Raman scattering
This paper presents the fabrication of photonic chips incorporating gold‑silver (Au Ag) bimetallic nanoparticles via a laser-induced method. Thin films of Au Ag were deposited on polycarbonate substrates and subsequently irradiated with an ArF excimer laser. During laser…
Semnan UniversityAtomic Energy Organization of Iran
Applied / lab · Says "fabricated".From OpenAlex · not yet reviewedDOI
- Elastic deformation of thin glass by excimer-laser-induced stress modification
Excimer laser irradiation of borosilicate glass enables precise surface modification through both ablation and stress engineering. This becomes particularly important in the field of high-precision optics, especially for thin mirrors, such as those used in X-ray telescopes, which…
Fundamental research · No laboratory or pilot wording.From OpenAlex · not yet reviewedDOI
- Fluid modeling of discharge-pumped ArF excimer lasers: Effects of F2 concentration on pulsed discharge dynamics
The discharge kinetic characteristics of an ArF excimer laser are investigated by using a one-dimensional fluid model, coupled with an external circuit and laser gain modules. It is found that a higher F2 concentration suppresses discharge breakdown, as indicated by a lower…
Tsinghua UniversityState Key Laboratory of Power System Operation and Control
Fundamental research · No laboratory or pilot wording.From OpenAlex · not yet reviewedDOIPDF
- Generation of anisotropic stress in borosilicate glass by excimer laser irradiation
Spatially homogeneous irradiation of borosilicate glass with an ArF excimer laser (193 nm) induces tensile stress by generating a stress bearing melt layer, deforming the substrate parabolically, analogous to a stress-bearing coating. Here, we show that patterned irradiation…
Fundamental research · No laboratory or pilot wording.From OpenAlex · not yet reviewedDOI
- Nanoswelling Structures of Silicone Rubber Under Aluminum Nanoparticles Induced by 193 nm ArF Excimer Laser
In metal nanoparticles, localized surface plasmon resonance occurs due to the interaction between electrons on the surface and light. Among them, aluminum (Al) nanoparticles are known to have a resonant absorption wavelength in the ultraviolet light region. In this paper, I found…
National Defense Academy of Japan
Fundamental research · No laboratory or pilot wording.From OpenAlex · not yet reviewedDOIPDF
- Modeling filamentary transitions in an ArF excimer laser
Abstract Filament formation in excimer laser discharge chambers often leads to premature termination of optical pulses, serving as a key factor affecting laser spatial homogeneity and energy stability. This study develops a 0–2D hybrid discharge model for ArF laser discharge…
Xi'an Jiaotong UniversityAir Force Engineering University
Fundamental research · No laboratory or pilot wording.From OpenAlex · not yet reviewedDOI
- Efficiency Enhancement of Photovoltaic Devices via Low-Heat Laser Contact Opening Using a 193 nm ArF Excimer Laser
Fundamental research · No laboratory or pilot wording.From OpenAlex · not yet reviewedDOI
- Giant Enhancement of Electrical Conductivity of Azo Thin Films by Irradiating of Excimer and Femtosecond Laser Wavelengths
As an importance of AZO thin films for different industrial applications, it is important to lowering its electrical resistivity and hence, enhancement of electrical conductivity. Therefore, in this research AZO thin film was fabricated by using sol gel method and then annealed…
Iranian Center for Quantum TechnologiesAtomic Energy Organization of Iran
Applied / lab · Says "fabricated".From OpenAlex · not yet reviewedDOI
- Numerical investigation of discharge evolution and breakdown characteristics of ArF excimer lasers
Abstract The corona bar induced pre–ionization is a crucial preliminary process in the operation of ArF excimer lasers, directly impacting the uniformity and stability of output laser. The ultraviolet corona pre–ionization, as the mainstream method, is tightly coupled with the…
Xi'an Jiaotong UniversityAcademy of Opto-Electronics
Fundamental research · No laboratory or pilot wording.From OpenAlex · not yet reviewedDOI
- Evaluating the efficacy of Nd:YAG fourth harmonic (266 nm) in comparison with ArF excimer (193 nm) in laser corneal reshaping: ex vivo pilot study
PURPOSE: Laser corneal reshaping is a common eye surgery utilized to overcome many vision disorders. Different UV laser wavelengths can be effective in the treatment. However, the ArF excimer laser (193 nm) is the most commonly used due to its high absorption in the cornea. In…
Cairo UniversityResearch Institute of Ophthalmology
Fundamental research · No laboratory or pilot wording.From OpenAlex · not yet reviewedDOIPDF
- Excimer Laser Surface Patterning for Photoluminescence Enhancement of Silicon Nanocrystals
A method for enhancing the photoluminescence of silicon nanocrystals in a silicon oxide matrix by fabrication of periodic surface structures through laser irradiation is demonstrated. ArF excimer lasers are used to produce periodic line structures by material ablation…
Institut für NanophotonikUniversity of Göttingen
Fundamental research · No laboratory or pilot wording.From OpenAlex · not yet reviewedDOIPDF
- Cu-Au core-shell nanostructures induced by ArF excimer laser irradiation
In this paper, Cu-Au nanospherical structures were formed on glass surfaces by nanosecond UV laser irradiation. ArF laser pulses (193 nm wavelength, 15 ns time duration) were used for the experiments. Cu-Au bimetallic thin-film sample surfaces are structured under ArF excimer…
University of KashanIranian Center for Quantum TechnologiesNuclear Science and Technology Research Institute
Fundamental research · No laboratory or pilot wording.From OpenAlex · not yet reviewedDOI
- Fabrication of silicone microcups on periodic microswelling structure of silicone rubber by 193-nm ArF excimer laser
National Defense Academy of Japan
Fundamental research · No laboratory or pilot wording.From OpenAlex · not yet reviewedDOI
- Study on high pressure plasma produced by ArF laser
When an ArF excimer laser beam was focused in a high pressure argon gas from 50 to 130 atm, the plasma development is observed by streak camera from side window of chamber. The high pressure ArF laser plasma develops symmetrically and the plasma produced by ArF excimer laser…
Fundamental research · No laboratory or pilot wording.From arXiv · not yet reviewedPDF